Loading

Mechanical & Materials Engineering

Mark R. Daymond

Student / postdoctoral authors are marked in bold.

Refereed publications - composite micromechanics

  1. Daymond, M.R. and Withers, P.J., "A New Stroboscopic Neutron Diffraction Method for Monitoring Materials Subjected to Cyclic Loads: Thermal Cycling of Metal Matrix Composites", Scripta Met., 35 (6) p717-720 (1996)
  2. Daymond, M.R. and Withers, P.J., "A Synchrotron Radiation Study of Transient Internal Strain Changes During the Early Stages of Thermal Cycling of MMCs", Scripta Met., 35 (10) p1229-1234 (1996)
  3. Daymond, M.R. and Withers, P.J., "In situ Monitoring of Thermally Cycled Metal Matrix Composites by Neutron Diffraction and Laser Extensometry", Appl. Comp. Mater. 4 (6) p375-394 (1997)
  4. Choo, H., Bourke, M.A.M., Nash, P., Daymond, M.R., and Shi, N., "Thermal Residual Stresses in NiAl-AlN-Al2O3 Composites Measured by Neutron Diffraction", Mat. Sci. & Eng. A264, p108-121 (1999)
  5. Daymond, M.R., Lund, C, Bourke, MAM & Dunand, DC, "Elastic Strain Distribution in Copper Reinforced with Molybdenum Particulates during Deformation at Low & High Temperature", Met. & Mat. Trans. 30A p2989-2997 (1999)
  6. Rangaswamy, P., Prime, M.B., Daymond, M.R., Bourke, M.A.M., Clausen, B. Choo, H., Jayaraman, N., "Comparison of Residual Strains Measured by X-ray and Neutron Diffraction in a Titanium Matrix Composite", Mat. Sci. Eng. A, 259(2), p209-219, (1999)
  7. Rangaswamy P., Daymond M.R., Bourke M.A.M., VonDreele R., Bennett K., Jayaraman N., "Texture and residual strain in two SiC/Ti-6-2-4-2 titanium composites", Met. & Mat. Trans., 31(3A) p889-898 (2000)
  8. Choo, H., Bourke, M.A.M., and Daymond, M.R., "A Finite Element Analysis of the Inelastic Relaxation of Thermal Residual Stress in Continuous Fiber Reinforced Composites", Comp. Sci. & Tech. 61(12) p1757-1772, (2001)
  9. de Fonseca, J.Q., Cochrane, R.F., Daymond, M.R. Mummery, P.M., and Young, R.M.K., . "Microyielding Effects in High Volume Fraction Composites", Advanced Eng. Mat., 3(11), p913-916, (2001)
  10. Daymond, M.R. and Fitzpatrick, M.E., ., "Effect of cyclic loading on strain distribution in a particulate reinforced metal matrix composite", Mat. Sci. Forum, v404, p541-546, (2002)
  11. Schofield P.F., Covey-Crump S.J., Stretton I.C., Daymond M.R., Knight K.S. & Holloway R.F., "Using neutron diffraction measurements to characterize the mechanical properties of polymineralic rocks", Min. Mag. A, 67(5), p967-987, (2003)
  12. Lee, K.L., Whitehouse, A.F., Withers, P.J. & Daymond, M.R., "Neutron Diffraction Study of the Deformation Behaviour of Deformation Processed Copper-Chromium Composites", Mat. Sci. Eng. A, v348 p208-216, (2003)
  13. Schneider, L.C.R., Fitzpatrick, M.E., Daymond, M.R., Hainsworth, S.V., Cocks, A.C.F., Measurement of Residual Stress in a Powder Metallurgy Aluminium-SiC Composite", J. Neutron Res., 12, p129-133 (2004)
  14. Daymond, M.R. & Fitzpatrick, M.E., "Effect of cyclic plasticity on internal stress in an MMC", Met. Mat. Trans. A, v37A, p1977-1986 (2006)
  15. Schofield, P.F., Covey-Crump, S.J., Daymond, M.R., Stretton, I.C., Knight, K.S., and Holloway, R.F., "Using neutron diffraction to characterize the mechanical properties of rocks", Physica B, v385-386, p938-941 (2006)
  16. Covey-Crump, S.J., Schofield, P.F., Daymond, M.R., "Using neutrons to investigate changes in strain partitioning between the phases during plastic yielding of calcite + halite composites", Physica B, v385-386, p946-948 (2006)
  17. Young, M.L., Almer J.D., Daymond, M.R., Haeffner, D.R. and Dunand, D.C., "Load partitioning between ferrite and cementite during elastic-plastic deformation of an ultrahigh-carbon steel", Acta Mater., 55(6) p1999-2011, (2007)
  18. Akhtar, R., Daymond, M.R., Almer, J.D., Mummery, P.M., "Load transfer in bovine plexiform bone determined by synchrotron X-ray diffraction", J. Materials Res., 23(2), p543-550 (2008).
  19. Akhtar, R., Daymond, M.R., Almer, J.D., Mummery, P.M. "Load transfer in antler trabecular bone determined by synchrotron X-ray diffraction", Acta Biomaterialia, 4(6), p1677-1687 (2008)
  20. Akhtar, R., Daymond, M.R., Almer, J.D., Mummery, P.M., "Lattice strains and load partitioning in bovine trabecular bone", Acta Biomaterialia, 7(2), p716-723 (2011)

Refereed publications - deformation of metals

  1. Daymond, M.R., Bourke, M.A.M., Von Dreele, R., Clausen, B. & Lorentzen, T., "Use of Rietveld Refinement for Elastic Macrostrain Determination and for the Evaluation of Plastic Strain History from Diffraction Spectra",
    J. Appl. Phys., 82 (4) p1554-1562 (1997)
  2. Clausen, B., Lorentzen, T., Bourke, M.A.M. and Daymond, M.R., "Lattice Strain Evolution during Uniaxial Tensile Loading of Stainless Steel", Mat. Sci. & Eng., 259(1), p17-24. (1999)
  3. Daymond, M.R., Bourke, M.A.M. and Von Dreele, R, "Use of Rietveld Refinement to fit Hexagonal Crystal Structures in the Presence of Elastic and Plastic Anisotropy", J. App. Phys., 85 (2) p739-747 (1999)
  4. Daymond, M.R., Tome, C.N. & Bourke, M.A.M, "Intergranular strains in textured steel", Mat. Sci. Forum, vol 347-349, p54-59, (1999)
  5. Korsunsky, A.M., Daymond, M.R. & Wells, K.E., "Strain Anisotropy in a Bent Aluminium MMC Bar", Mat. Sci. For. 347, p492-7, (1999)
  6. Daymond, M.R., Tome, C.N. & Bourke, M.A.M., "Measured and predicted intergranular strains in textured austenitic steel", Acta Mat., vol. 48, p553-564 (2000)
  7. Daymond, M.R. & M.W. Johnson, "Determination of a stress free lattice parameter without a stress free material using elastic anisotropy", J. Appl. Cryst., Vol 34, Pt3, p263-270, (2001)
  8. Daymond, M.R. & A.M. Korsunsky, , "Determination of macroscopic plastic strain by analysis of multiple diffraction peaks", J. Phys. Soc. Jpn., vol 70A, p545-547 (2001)
  9. Matthies, S., Priesmeyer, H.G., and Daymond, M.R., "On the Diffractive Determination of Elastic Single Crystal Constants Using Polycrystalline Samples", J. App. Cryst., 34(5), p585-601 (2001)
  10. Daymond, M.R. & M.W. Johnson, "The determination of d0 without a reference material", J. N. Res., 9 (2-4), p469-479, (2001)
  11. Cho, J.R., Dye, D., Conlon, K.T., Daymond, M.R., and Reed, R.C., "Intergranular strain accumulation in a near-alpha titanium alloy during plastic deformation", Acta Mater. 50 (19) p4847-4864 (2002)
  12. Lorentzen, T., Daymond, M.R., Clausen, B., & Tomé, C.N, "Lattice Strain Evolution During Cyclic Loading Of Stainless Steel", Acta Mater. 50(6), p1627-1638 (2002)
  13. Korsunsky, A.M., Daymond, M.R., and Wells, K.E., "The Correlation Between Plastic Strain and Anisotropy Strain in Aluminium Alloy Polycrystals", Mat. Sci. Eng. A, 334, p41-48, (2002)
  14. Daymond, M.R. and Bonner, N.W., "Lattice strain evolution in IMI834 under applied stress", Mat. Sci. Eng. A, 340, p263-271 (2002)
  15. Daymond, M.R. and Priesmeyer, H.G., "Elastoplastic deformation of ferritic steel and cementite studied by neutron diffraction and self-consistent modelling", Acta Mater. 50(6), p1613-1626 (2002)
  16. Daymond, M.R. & Oliver, E.C. "Internal Strain Development during Dynamic Strain Ageing in Aluminium", J. Neutron Res., 12, p213-217 (2004)
  17. Oliver, E.C., Daymond, M.R., Quinta da Fonseca, J. & Withers, P.J., "Intergranular Stress Evolution in Pure Titanium Studied by Neutron Diffraction and Self-Consistent Modelling", J. Neutron Res. 12 p33-37 (2004)
  18. Korsunsky, A.M., James, K.E. and Daymond, M.R., "Intergranular stresses in polycrystalline fatigue: diffraction measurement and self-consistent modelling", Engineering Fracture Mechanics, 71 (4-6), p805-812 (2004)
  19. Oliver, E.C., Daymond, M.R. & Withers, P.J., "Interphase and intergranular stress generation in carbon steels", Acta Mater., 52 p1937-1951 (2004)
  20. Daymond, M.R., Hartig, Ch., Mecking, H., "Interphase and intergranular stress development in a composite with both phases deforming plastically", Acta Mater. 53(9) p2805-2813 (2005)
  21. Poulsen, H.F., Wert, J.A., Neufeind, J., Honkimaki, V., and Daymond, M.R., "Measuring Strain Distributions in Amorphous Materials", Nature Materials, 1, p33-36 (2005)
  22. Oliver, E.C., Daymond, M.R. & Withers, P.J., "Neutron diffraction study of extruded magnesium during cyclic and elevated temperature loading", Mat. Sci. Forum, 490 p257-262 (2005)
  23. Oliver, E.C., Daymond, M.R. & Withers, P.J., "Effects of texture and anisotropy on intergranular stress development in zirconium", Mat Sci. Forum, 495, p1553-1558 (2005)
  24. Daymond, M.R., "A combined finite element and self-consistent model; Validation by neutron diffraction strain scanning", Mat Sci Forum, 495, p1019-1024 (2005)
  25. Ma, S., Brown, D., Bourke, M.A.M., Daymond, M.R. & Majumdar, B.S. "Microstrain evolution during creep of a high volume fraction superalloy", Mat. Sci. Eng. A. 399(1-2) p141-153(2005)
  26. Santisteban, J.R., Oliver, E.C., Daymond, M.R., Alianelli, L., and Edwards, L., "Tensile deformation of a Cu mosaic crystal along the <110> direction studied by time of flight neutron transmission", Mat. Sci. Eng. A, 437, p151-156 (2006)
  27. Daymond, M.R. & Bouchard, P.J. "Elastoplastic deformation of 316 stainless steel under tensile loading at elevated temperatures", Met. Mat. Trans. A, v37A, p1863-1873 (2006)
  28. Daymond, M.R. "Internal Stresses in Deformed Polycrystalline Aggregates", Reviews in Mineralogy and Geochem., 63, p427-458. (2006)
  29. Cai S., Daymond, M.R., Holt, R. and Oliver E.C., "Evolution of Interphase Stress in Zr-2.5%Nb during Deformation", Adv. Mat. Res., v15-17, p615-620. (2007)
  30. Daymond, M.R., Preuss, M., Clausen, B., "Evidence of variation in slip mode in a polycrystalline nickel-base superalloy with change in temperature from neutron diffraction strain measurements", Acta Mater. 55(9), p3089-3102 (2007).
  31. Xu, F., Holt, R.A. , Oliver, E.C., Daymond, M.R. , "Evolution of Lattice Strains in Three Dimensions during In-situ Compression of Textured Zircaloy-2", Journal of Neutron Research, Volume 15, pp 121-130. (2007).
  32. Allen, V.M., Quinta da Fonseca, J., Preuss, M., Robson, J.D., Daymond, M.R., Comstock, R.J. , "Determination and Interpretation of texture evolution during deformation of a zirconium alloy", J. ASTM Int., 5(1), JAI101255 (2008).
  33. Xu, F., Holt R.A., Daymond M.R., "Evidence for Basal <a>-slip in Zircaloy-2 at Room Temperature from Polycrystalline Modeling", J. Nucl. Mater.; 373, p217-225 (2008).
  34. Zhang, R.Y., Daymond, M.R., Holt, R.A., "A Finite Element model of twinning in zirconium", Mat. Sci. Eng. A.; 473(1-2), p139-146 (2008).
  35. Zanellato, O., Fitzpatrick, M.E., Daymond, M.R., Edwards, L., Turski, M. "Development of intergranular strains during in situ compression tests in Zircaloy-4", Mat. Sci. Forum, 571-572, p149-154 (2008).
  36. Xu, F., Holt R.A., Daymond M.R., Rogge R.B. Oliver E.C., "Development of Internal Strains during Uni-axial Deformation in Textured Zircaloy-2", Mat Sci Eng. A, 488(1-2), p172-185 (2008).
  37. Xu, F., Holt R.A., Daymond M.R., "Modelling of Development of Internal Strains during Uni-axial Deformation in Textured Zircaloy-2", Acta Mater. v56(14), p3672-3687 (2008).
  38. Kerr, M., Daymond M.R., Holt R.A., and Almer, J.D., "Strain evolution of zirconium hydride embedded in a Zircaloy-2 matrix", J. Nucl. Mater. v380, p70-75 (2008).
  39. Holt R.A., Daymond M.R., Xu, F., Cai, S., "Inter-granular and Inter-phase Constraints in Zirconium Alloys", J. ASTM International, v5(6), JAI101304 p(2008).
  40. Cai, S., Daymond, M.R., Holt, R.A. "Modeling the room temperature deformation of a two phase zirconium alloy", Acta Mater. v57(2), p407-419 (2009).
  41. Cai, S., Daymond, M.R., Holt, R.A., Gharghouri, M.A., Oliver, E.C. "Evolution of Interphase and Intergranular Stresses in Zr-2.5Nb during Room Temperature Deformation", Mat. Sci. Eng. A.; v501(1-2), p166-181 (2009).
  42. Cai, S., Daymond M.R., A.K. Khan, Holt R.A., Oliver E.C., "Elastic and plastic properties of beta-Zr at room temperature", J. Nucl. Materials; v393(1), p67-76 (2009)
  43. Kerr, M., Daymond, M.R., Holt, R.A., Almer, J.D., Stafford, S., Colas, K.B., "Fracture of a minority phase at a stress concentration observed with synchrotron X-ray diffraction", Scripta Mater.; v61(10), p939-942 (2009).
  44. Xu, F., Holt, R.A., and Daymond, M.R., "Modeling texture evolution during uni-axial deformation of Zircaloy-2",J. Nucl. Materials; v394(1), p 9-19 (2009).
  45. Kerr, M., Daymond, M.R., Holt, R.A., Almer, J.D., Stafford, S., "Observation of growth of a precipitate at a stress concentration", Scripta Mater., v62(6), p341-344 (2010)
  46. Kerr, M., Daymond, M.R., Holt, R.A., Almer, J.D., "Mapping of crack tip strains and twinned zone in an hcp alloy", Acta Mater. v58(5), p1578-1588 (2010)
  47. C. Mareau, M.R. Daymond "Study of internal strain evolution in Zircaloy-2 using polycrystalline models: comparison between a rate-dependent and a rate-independent formulation", Acta Mater., v58(9); p3313-3325 (2010).
  48. M. Preuss, J.Q. da Fonseca, V. Allen, D.G. Leo-Prakash, M.R. Daymond, "Twinning in structural materials with an hcp crystal structure", J. Strain Analysis, v45; p377-389 (2010)
  49. W. Li, R.A. Holt, M.R. Daymond, F. Xu "Modeling creep anisotropy of internally pressurized Zr-2.5Nb tubes", J. Nuclear Materials, v412(1), p138-144 (2011)
  50. R.Y. Zhang, M.R. Daymond, R.A. Holt, "Parametric study of stress state development during twinning using 3D finite element modeling", Mat. Sci. Eng. A. vA528 (2011) pp 2725-2735.
  51. H. Abdolvand, M.R. Daymond, C. Mareau, "Incorporation of twinning into a crystal plasticity finite element model: evolution of lattice strains and texture in Zircaloy-2", Int. J. Plasticity v27, p1721-1738 (2011),
  52. Cai, S., Daymond M.R., Holt R.A., Oliver E.C., "Evolution of internal strains in a two phase zirconium alloy during cyclic loading", Acta Mater v59(13), p5305-5319 (2011)
  53. C. Mareau, M.R. Daymond, "Comparison of experimentally determined texture development in Zircaloy-2 with predictions from a rate dependent polycrystalline model", Mat. Sci. Eng A, v528(29-30), p8676-8686 (2011).
  54. A. Khan, Z. Yao, M.R. Daymond, R.A. Holt, "Microstructure evolution during ion and electron irradiation in commercial purity Magnesium", Nucl. Inst. Methods B. v 272(1) p231-235 (2012).
  55. E. Tulk, M. Kerr, M.R. Daymond, "Material Yield Strength Effect on the Precipitation of Hydride Phases in Zirconium Alloys", J. Nucl. Materials. v425, p93-104 (2012).
  56. H. Abdolvand, M.R. Daymond, "Internal strain and texture development during twinning; comparing neutron diffraction measurements with crystal plasticity finite element approaches", Acta Mater. v60 p2240-2248 (2012)
  57. S. Cai, M.R. Daymond, R.A. Holt, "Deformation of high b-phase Zr-Nb alloys at room temperature", Acta Mater. 2012, v60 p3355-3369 (2012)
  58. A. Khan, Z. Yao, M.R. Daymond, R.A. Holt, "Effect of foil orientation on damage accumulation behaviour in magnesium during irradiation and annealing response of dislocation loops", J. Nucl. Mater. 423, 132-141 (2012)

Refereed publications - phase transformations

  1. Daymond, M.R., Schreiber, J. and Taran, Y.V., "Mechanical Characterisation of Fatigued Austenitic Stainless Steel under Applied Loads by In-Situ Neutron Diffraction", J. N. Res., vol 9 (2-4), p207-215, (2001)
  2. Šittner, P, Lukáš, P, Daymond, M.R., Novák, V & Swallowe, G.M. "Stress induced martensitic transformation in polycrystals investigated by in situ neutron diffraction.", J. Phys. IV, 11, p159-166. (2001)
  3. Clausen, B., Rogan, R.C., Ustundag, E., Daymond, M.R., and Knoblauch, V., "Ferroelastic behaviour of PZT based ferroelectric ceramics", Mat. Sci. Forum, 404, p413-418, (2002).
  4. Šittner, P., Lukáš, P., Neov, D., Daymond, M.R., Novák, V. and Swallowe, G.M., "Stress induced martensitic transformation in CuAlZnMn polycrystals investigated by two in situ neutron diffraction techniques", Mat. Sci. Eng. A, A324, p225-234, (2002)
  5. Taran, Y.V., Daymond, M.R., Eifler, D., Nebel, T. and Schrieber, J., "Neutron diffraction study of plasticity induced martensite formation in austenitic stainless steel", Mat. Sci. Forum, 404, p501-506, (2002)
  6. Oliver, E.C, Daymond, M.R., Withers P.J., Mori, T., "Stress induced martensitic transformation studied by neutron diffraction", Mat. Sci. Forum, vol 404, p413-418, (2002)
  7. Taran, Y.V., Daymond, M.R. and Schrieber, J., "Time of flight neutron diffraction investigations of elastic and anisotropy strains in fatigued austenitic stainless steel", Applied Physics A, 74, pS1385-1387 (2002)
  8. Oliver, E.C., Withers, P.J., Daymond, M.R., Ueta, S. and Mori, T., "Neutron Diffraction Study of Stress Induced Martensitic Transformation in TRIP Steel", Applied Physics A, 74, pS1143-1145 (2002)
  9. Rogan, R.C., Üstündag, E., Clausen, B. and Daymond, M.R., "Texture and Strain Analysis of the Ferroelastic Behavior of Pb(Zr,Ti)O3 by In-Situ Neutron Diffraction", J. Appl. Phys. 93[7] p4104 (2003)
  10. Oliver, E.C., Kobayashi, N., Mori, T. and Daymond, M.R., "Structure of a stress-induced martensite plate and its formation stress", Scripta Mater., 49 p1013-1019 (2003)
  11. Oliver, E.C., Mori, T., Daymond, M.R. and Withers, P.J., "Neutron diffraction study of stress induced martensite transformation and variant change in FePd", Acta Mater., 51 p6453-6464 (2003)
  12. Taran, Yu.V., M.R.Daymond & J.Schreiber, "Residual Stress Analysis of Neutron Diffraction Spectra from Multiphase System Under Load on an Example of Austenitic Stainless Steel with Plastically Induced Martensite", J. Neutron Res. 11, p255-261 (2004)
  13. Šittner, P, Lukáš, P, Novák, V, Daymond, M.R. & Swallowe, G.M., "In situ neutron diffraction studies of martensitic transformation in NiTi polycrystals under tension and compression stress", Mat. Sci. Eng. A378, p97-104, (2004)
  14. Mori, T., Oliver, E.C., Daymond, M.R. & Withers, P.J., "An analysis of lattice strain due to disclination dipole walls in Fe-Pd martensite", J. Neutron Res., 12 p39-44 (2004)
  15. Mori, T., Oliver, E.C., Daymond, M.R. & Withers, P.J., "Micromechanics of stress-induced martensitic transformations", Mat. Sci. Eng. A, 378(1-2), p479-483 (2004)
  16. Taran, Yu.V., Daymond, M.R. & Schreiber, J. "Interplay of stresses induced by phase transformation and plastic deformation during cyclic load of austentic stainless steel", Physica B, 350 (1-3), p98-101. (2004)
  17. Oliver, E.C., Mori, T., Daymond, M.R. and Withers, P.J., "Stress-induced martensitic transformation and variant change in an Fe-Pd shape memory alloy", Mat. Sci. Eng. A., 378 (1-2), p328-332 (2004)
  18. Oliver, E.C., Mori, T., Daymond, M.R. and Withers, P.J., "Orientation dependence of diffraction peak intensities during uniaxial loading of Fe-Pd shape memory alloy", Scripta Mat. 53(5), p609-612 (2005)
  19. Benson, M.L., Saleh, T.A., Liaw, P.K., Choo, H., Brown, D.W., Daymond, M.R., Wang, X.-L., Stoica, A.D., Buchanan, R.A., and Klarstrom, D.L., "Fatigue-induced phase formation and its deformation behavior in a cobalt-based superalloy", Powder Diffraction, 20(2), p121-124, (2005).
  20. Taran, Y.V., Daymond, M.R., Eifler, D., Nebel, T and Schreiber, J., "Investigation of the mechanical features of low cycle fatigue samples of austenitic steel AISI 321 under applied load by neutron diffraction stress analysis", Mat. Sci. Tech, 21(1) p35-45 (2005)
  21. Swallowe G.M, Sittner P., Daymond M.R., "Intergranular strains in transforming NiTi alloys", IEEE Transactions on Nuclear Science 52 (1): p326-329 (2005)
  22. Ustundag E., Rogan R.C., Daymond, M.R., Tamura, N., Margulies, L., Poulsen, H., "Multiscale study of internal stress and texture in ferroelectrics", Mat. Sci, Forum, 490 p28 (2005)
  23. Taran, Y.V., Daymond, M.R., Oliver, E.C. and Schreiber, J. "Study of martensitic transformation in fatigued stainless steel by neutron diffraction stress analysis", Zeitschrift für Kristallographie, 23, p345-350. (2006)
  24. Yu.V.Taran, J.Schreiber, M.R.Daymond and E.C.Oliver , "Fatigue Degradation and Martensitic Transformation of Austenitic Stainless Steel AISI 321: New Results and Prospects", Materials Science Forum vols. 524-525 p899-904 (2006)
  25. Benson, M.L. , P.K. Liaw, T.A. Saleh, H. Choo, D.W. Brown, M.R. Daymond,E.-W. Huang, X.-L. Wang, A.D. Stoica, R.A. Buchanan, D.L. Klarstrom, "Deformation-induced phase development in a cobalt-based superalloy during monotonic and cyclic deformation", Physica B, v385-386, p523-525 (2006)
  26. Daymond, M.R., Young, M.L., J.D. Almer & D.C. Dunand "Strain and texture evolution during mechanical loading of a crack tip in martensitic shape-memory NiTi", Acta Mater.55(11), p3929-3942 (2007)
  27. Jones, L.J., Pramanick, A., Nino, J.C., Motahari, S.M., Ustundag, E., Daymond, M.R. and Oliver E.C. , "Time-resolved and orientation-dependent electric-field-induced strains in lead zirconate titanate ceramics", Appl. Phys. Letters, v90, 172909, (2007)
  28. Oliver, E.C., Mori, T., Daymond, M.R., Withers P.J., "Neutron diffraction comparison of martensitic transformation in Fe-Mn-Si shape memory alloys with and without VN precipitates", Mat. Sci. Tech., v24(8), p902-907 (2008).
  29. M.R. Daymond, R.A. Holt, S. Cai, P. Mosbrucker, S. Vogel "Texture inheritance and variant selection through an hcp - bcc - hcp phase transformation", Acta Mater. v58, p4053-4066 (2010).
  30. Colas, K.B., A.T. Motta, Y.S. Chu, J.D. Almer, M.R. Daymond, M. Kerr, A.D. Banchik, P. Vizcaino and J.R. Santisteban, "In-situ study of hydride precipitation kinetics and re-orientation in Zircaloy using synchrotron radiation", Acta Mater., v58(20) p6575-6583 (2010).
  31. Colas, K.B., A.T. Motta, M.R. Daymond, M. Kerr, J.D. Almer "Hydride platelet reorientation in Zircaloy studied with synchrotron radiation diffraction", J. ASTM Int., v8(1), JAI103033. (2011).
  32. Mosbrucker, P., M.R. Daymond, R.A. Holt "In situ studies of variant selection during the a-b-a phase transformation of Zr2.5Nb", J. ASTM Int., v8(1), JAI103066. (2011).
  33. Benson, M.L. , P.K. Liaw, H. Choo, D.W. Brown, M.R. Daymond, D.L. Klarstrom, "Strain-induced phase transformation in a cobalt-based superalloy during different loading modes", Mat. Sci. Eng. A, v528(18), p6051-6058, (2011).
  34. B.M.B. Grant, E. Knoche, M. Preuss, J.Q. da Fonseca, M.R. Daymond, "Effect of lattice misfit on deformation mechanisms at high temperature", Advanced Materials Research, v278, p144-149. (2011)
  35. G.B. Allen, M. Kerr, M.R. Daymond, "Measurement and modelling of strain fields in hydrides precipitated at a stress concentration", J. Nucl. Mater, v430, p27-36 (2012)

Refereed publications - engineering mechanics

  1. Edwards, L., Santisteban, J.R., Stelmukh, V., Bouchard, P.J. & Daymond, M.R., "Measurement of the Residual Stresses Near a Short 20° Repair in a 19mm Thick Stainless Steel Pipe Girth Weld", J. N. Res. v9 (2-4), p173-180, (2001)
  2. Korsunsky A.M., Collins S.P., Owen R.A., Daymond M.R., Actioui S., James K.E., "Fast residual stress mapping using energy dispersive synchrotron X-ray diffraction", J. Synchrotron Rad., 9, p77-81, (2002)
  3. Turquier, F., Levy-Tubiana, R., Pirling, T., Daymond, M.R., Romanzetti, S., Carsughi, F. & Rustichelli, F., "Residual stress states before irradiation in ESS target structural materials", Appl. Phys. A, 74, p1197-1199. (2002)
  4. Santisteban, J.R, Edwards, L, Steuwer, A, Withers, P.J, Daymond, M.R, Johnson, M.W, Rhodes, N.J & Schooneveld, E.M., "Strain imaging by Bragg edge neutron transmission", Nuc. Inst. & Meth. A, 481 p765-768 (2002)
  5. Martinez, M.L., Borlado, C.R., Mompean, F.J., Peng, R-L., Daymond, M.R., Ruiz, J. and Garcia-Hernandez, M., "Neutron strain scanning in straightened steel rods", Applied Physics A, 74, pS1679-1682 (2002)
  6. Daymond, M.R. and Bonner, N.W., "Measurement of Strain in a Titanium Linear Friction Weld", Physica B. 325 p130-137, (2003)
  7. Hossain, S., Daymond, M.R., Truman, C.E. & Smith, D.J., "Prediction and Measurement of Residual Stresses in Quenched Stainless Steel Spheres", Mat. Sci. Eng. A, 373, p339-349, (2004)
  8. Hossain, S., Truman, C.E., Smith, D.J. & Daymond, M.R., "Creating Highly Triaxial Residual Stresses and Relaxation of the Stress Field due to Thermal Ageing", J. Neutron Res., 12, p111-115. (2004)
  9. Scheffzük, C., Walther, K., Frischbutter, A., Eichhorn, F., Daymond, M.R. "Residual strain and texture measurements using neutron-TOF-diffraction on a dolomite-anhydrite rock and a quartz-dunite compound", Solid State Phen. 105, p61-66 (2005)
  10. Martinez-Perez, M.L., Borlado, C.R., Mompean, F.J., Garcia-Hernandez, M., Gil-Sevillano, G., Ruiz, J., Peng, R-L, and Daymond, M.R., "Measurement and modelling of residual stresses in straightened commercial eutectoid steel rods", Acta Mater., 53 (16) p4414-4425 (2005)
  11. Dobson, D., Mecklenburgh, J., Alfe, D., Wood, I., and Daymond, M.R. "A new belt-type apparatus for neutron-based rheological measurements at gigapascal pressures", High Pressure Research 25(2) p107-118. (2005)
  12. Siano, S., Bartoli, L., Santisteban, J. R., Kockelmann, W., Daymond, M.R., Miccio, M., de Marinis, G., "Non-destructive investigation of bronze artefacts from the marches National Museum of Archaeology using neutron diffraction", Archaeometry, 48(1), p77-96 (2006)
  13. Santisteban, J.R. Siano, S. & Daymond, M.R. "Neutron strain scanning of archaeological bronzes", Materials Science Forum Vols. 524-525 p975-980 (2006)
  14. M. Turski, S. Pratihar, L. Edwards, M. R. Daymond and M.E. Fitzpatrick, The Effect of Plastic Anisotropy on the Residual Stress within a 316L, Stainless Steel Bead-on-Plate Specimen, Materials Science Forum Vols. 524-525 p679-684 (2006)
  15. Rist, M.A., Tin, S., Roder, B.A., James, J.A. Daymond, M.R., "Residual stresses in a quenched superalloy turbine disc: Measurements and modeling", Met. Mat. Trans A, 37A(2), p459-467 (2006)
  16. Hossain, S., Truman, C.E., Smith, D.J. Daymond, M.R., "Application of quenching to create highly triaxial residual stresses in type 316H stainless steels", Int. J. Mech. Sci, 48, p235-243, (2006)
  17. Covey Crump, S.J., Holloway, R.F., Schofield, P.F., Daymond, M.R. "A new apparatus for measuring mechanical properties at moderate confining pressures in a neutron beamline", J. Appl. Cryst. 39 p222-229 (2006)

Refereed publications - diffraction optics and data analysis

  1. Johnson, M.W. Daymond, M.R., "The Neutron Silicon Lens: A New Lens Design for Thermal Neutrons", Physica B, 283, p308-313 (2000)
  2. Daymond, M.R., "The blurring in strains measured at a pulsed neutron source introduced by use of a detector with a large angular coverage", Physica B, v 301, 3-4, p221-226, (2001)
  3. Steuwer, A., Withers, P.J., Santisteban, J.R., Edwards, L., Bruno, G., Fitzpatrick, M.E., Daymond, M.R., Johnson, M.W., and Wang, D.Q., "Bragg Edge Determination for Accurate Lattice Parameter and Elastic Strain Measurement", Physica A, 185(2), p221-230, (2001)
  4. Withers, P.J., Daymond, M.R. Johnson, M.W., "The precision of diffraction peak location", J. Appl. Cryst., 34, p737-743 (2001)
  5. Steuwer, A., Santisteban, J.R., Withers, P.J., Edwards, L., Fitzpatrick, M.E., Daymond, M.R. and Johnson, M.W., "The Sin2y Technique in Time-Of-Flight Neutron Transmission", J. N. Res., 9 (2-4), p289-294, (2001)
  6. Johnson, M.W. and Daymond, M.R., "An Optimum Design for a Time-of-Flight Neutron Diffractometer for Measuring Engineering Stresses", J. Appl. Cryst, vol. 35(1), p49-57, (2002).
  7. Daymond, M.R., Johnson, M.W. and Sivia, D.S. "Bayesian Analysis of Neutron Diffraction Data from a Round Robin Sample", J. Strain Analysis, 37(1), p.73-85 (2002)
  8. Daymond, M.R. and Johnson, M.W., "First experimental tests on a neutron silicon lens", Nuc. Inst. Methods A, vol 485, p606-614 (2002)
  9. Daymond, M.R., Withers, PJ & Johnson, M.W. "The expected uncertainty of diffraction peak location", Appl. Phys. A, 74, p112-114 (2002)
  10. Johnson, M.W., Manolopoulos, S., Rhodes, N.J., Schooneveld, E.M., Turchetta, R., and Daymond, M.R., "Silicon APS detectors for neutron scattering", Nuc. Inst. & Methods A., 501(1), p72-79. (2003)
  11. Johnson, M. W., & Daymond, M. R., (2003) Neutron Pulsed Source Instrumentation, in Analysis of Residual Stress by Diffraction using Neutron and Synchrotron Radiation, eds. M.E. Fitzpatrick and A. Lodini, Taylor & Francis Publishing, UK
  12. Balzar, D., Audebrand, N., Daymond, M.R., Fitch, A., Hewat, A., Langford, J.I., Le Bail, A., Louër, D., Masson, O., McCowan, C.N., Popa, N.C., Stephens, PW., Toby, B., "Size-Strain Line-Broadening Analysis of a Ceria Round-Robin Sample", J. Appl. Cryst. (2004), 37, p911-924
  13. Dann, J.A., Daymond, M.R., Edwards, L., James, J.A. Santisteban, J.R. "A comparison between Engin and Engin-X, a new diffractometer optimised for stress measurement", Physica B. 350(1-3) p511-514 (2004)
  14. James, J.A., Santisteban, J.R., Edwards, L. Daymond, M.R. "A Virtual Laboratory for Neutron and Synchrotron Strain Scanning", Physica B. (2004) 350(1-3) p743-746
  15. Daymond, M.R., "The determination of a continuum mechanics equivalent elastic strain from the analysis of multiple diffraction peaks", J. Appl. Phys. (2004), 96 (8) p4263-4272.
  16. Santisteban, J.R., Daymond, M.R., Edwards, L. and James, J.A., "Engin-X: a third generation neutron strain scanner", J. Appl. Cryst. (2006), 39(8), p812-825
  17. Üstündag, E., Karnesky, R. A., Daymond, M. R. and Noyan, I.C., "Dynamical Diffraction Effects on Peak Profile and Position in Time-of-Flight Neutron Diffraction", Appl. Phys. Lett., v89, Art. 233515 (2006)
  18. G. Tutuncu , M. Motahari, M.R. Daymond, E.Ustundag, "A modified Rietveld method to model highly anisotropic ceramics", Acta Mater., (2012) v60, p1494-1502
  19. H.M. Reiche, S.C. Vogel, P. Mosbrucker, E.J. Larson, M.R. Daymond, "A furnace with rotating load frame for in situ high temperature deformation and creep experiments in a neutron diffraction beam line" Rev. Sci. Instrum. (2012) v83, 053901
  20. T. Skippon, C. Mareau, M.R. Daymond, "On the determination of single crystal plasticity parameters by diffraction: optimization of a polycrystalline plasticity model using a Genetic Algorithm", J. Appl. Cryst., v45, p527-643, (2012)
  21. L. Balogh, D.W. Brown, P. Mosbrucker, F. Long, M.R. Daymond, Dislocation structure evolution induced by irradiation and plastic deformation in Zr-2.5Nb nuclear structural material determined by neutron diffraction line profile analysis, Acta Mater. v60(15), p5567-5577 (2012)

Reports and public interest articles

  1. Daymond, M.R. and Edwards, L. "Squeezing the most out of neutrons", Materials World, p22-23, (2000)
  2. VAMAS Technical Report No. 38, ed. Webster, G.A. ISSN 1016-2186, Contributions to Chapters 3 & 5. (2000)
  3. Stretton, I.C., S.J. Covey-Crump, P.F. Schofield, M.R. Daymond, K.S. Knight, "The partitioning of strain during rock deformation", Crystallography News 79 8 (2001)
  4. Daymond, M.R. and Edwards, L., "ENGIN-X, A Fully Refined Diffractometer", Neutron News, 15 (1), p24-28 (2004).
  5. Zhang, SY, Godfrey E, et al., "High-Tech Composites to Ancient Metals", Materials Today, v12 (7-8), p78-84, (2009).